This trailer hitch reel caddy is specially designed to catch the rod, lift the reel (hand crank assist) and hold it in place as you pull back on the cable or the strap for your job application. It will accommodate all 30 inch in diameter cable reels and smaller, with a 30 inch reel space. The width of the unit is adjustable from 26" to 30" to acomodate various size reels. Holds multiple reels for different job applications. Heavy duty construction allows loads up to 300 lbs. Custom size order are available based on customer needs. This unit is equipped with a nylon strap rated for 1500 lbs. Instructions Install the Hand crank assist bar in a 2 inch trailer hitch receiver and secure it with a 5/8" hitch pin. Attach the upright reel holder by securing it with a 5/8' hitch pin. Connect the cable from the hand crank to the D-ring on the upright reel holder. Assemble the 3/4" pipe and run it trough the center hole of the reel. Secure the reel with the 2 counter pins and lift it from the ground in the upright position. Secure the upright reel holder with a 5/8" hitch pin.